Farm Fencing Equipment Electric Fence Tester for Energizer HC1667

The tester electric fence digital voltmeter measures voltage on your electric fence this is a good digital voltmeter to measure the voltage on your electric fence it has a range from 0.01-10.0kv (10-10000 volts) operates off a 9v battery.works with peak discharge,intermitten fence energizer

less than 10 kv.

Electric fence Digital Tester for fence line/fence energizer/fence tape

Step1 Apply power to the fence by tyrning on the fence energizer. 

Step3 Hang the voltage tester on the fence wire .

Step4 Observe the voltage level indicated on the fence tester.

Product advantage

This easy to use voltage tester has six levels of voltage reading from 10 volt through to 9900V indicator, simple stick the wire tail into the ground and touch the top conductor to the fence! Can also be used to test the output directly from your energiser.

Designed to be used with battery powered or mains energisers. Essential for daily fence monitoring; shows the condition of your fence in eight stages (10 to 9900 volts); complete with connecting cable 

and earth stroke. It features smart power technology so that it will turn-on at the detection of a pulse 

and turn -off after about 4 seconds when no pulse is detected This technology saves battery power 

and ensures that the fence tester is turned-off when not in use Respectively apply the following

impulses to electric fence voltage tester: 10V~9900V When electric fence voltage tester measures impulses, its BULB will lighting.